Northwestern University Library Home
StaffWeb Home - Staff Intranet for Northwestern University Library Royko Home - Staff SharePoint Site for Northwestern University Library
Marjorie I. Mitchell Multimedia Center
Patching from the Touchscreen to the Forum Room and Video Theater
Certain events held in the Forum Room and Video Theater require that a signal which is to be viewed from the main rack be patched to a specific room. These events usually need to use the TV tuner or a multi-standard VCR/DVD player, or the 3/4" Umatic deck. Before you simply use the Touchscreen to patch a signal to these rooms, however, some prior set up is required.

Patching from the Touchscreen to the Forum Room

  1. Go into the Forum Room and unlock both sides of the equipment cabinet located in the back of the Forum Room.
  2. In the equipment cabinet, there is a drawer under the audio cassette deck. Open this drawer and take out the pink video patch cable and the two black audio patch cables. Note that while the pink video cable has only one set of connectors, the black audio cable has two sets of connectors (one for each stereo audio channel).
  3. On the right side of the cabinet, find the two patch bays. These are the long and narrow pieces of equipment in the rack that each have two long rows of holes in them. You will be plugging the cables into these holes. Of the two patch bays, the top light-colored bay is used for video and the bottom black bay is used for audio.
  4. On the top patch bay, connect the pink video cable between the holes marked with dots for::
    1. the outlet labelled "A/V Switch Input #4" (the 5th outlet from the left on the bottom row of outlets) and
    2. the outlet labelled "MDA" (the 2nd outlet from the right on the bottom row of outlets)
  5. On the bottom patch bay, connect the black audio cables between the holes marked with dots for::
    1. the two outlets labelled "A/V Switch In #4"(the 3rd and 4th outlets from the left on the bottom row of outlets) and
    2. the two outlets labelled "MDA"(the 5th and 6th outlets from the right on the top row of outlets)
  6. Go over to the Forum Room podium and select the button labelled "Patch Panel."
  7. Go back to the service counter in the Multimedia Center and, using the Touchscreen, patch the desired source into the Forum Room.
  8. Press "PLAY" on the specific source requested for the room from the rack at the time it is needed for viewing.

Patching from the Touchscreen to the Video Theater

Patching is not available from the Multimedia Center's touchscreen to the Video Theater at the present time.